Alchemix Cleaning Fluid 8014 is a powerful cleaning and flushing agent for two-component application equipment. Whilst efficiently removing unreacted material from the equipment, 8014 also acts to lubricate seals, preventing them from drying out. It is also effective at dissolving and purging crystallised isocyanate from old hoses or joints.

ALCHEMIX A84 is a matallic filler consisting of Aluminium granules which can be added to specific resins to alter the properties.

ALCHEMIX A85 is a mineral filler consisting of Silica sand, which can be added to specific resins to alter the properties.

ALCHEMIX A87 Fillite is a glass hard, inert, hollow silicate sphere. It is primarily used to reduce the weight of plastics, rubber, resin and cement etc. It also imparts further benefits in many situations. Due to spherical nature of the particles, increased filler loading and improved rheology can be obtained while using A87 Fillite.

ALCHEMIX GELCOAT EP 401 is a two component, iron filled, brushable, room temperature curing surface coat. GELCOAT EP 401 is designed for use in polyurethane foam moulds, resin injection moulds, foundry patterns and vacuum forming tools.

ALCHEMIX GELCOAT EP 4060 is a two component, aluminium filled, brushable, room temperature curing surface coat. GELCOAT EP 4060 is designed for applications requiring high heat and chemical resistance and negatives where very fine surface finishes are required.

ALCHEMIX EP 4060C is a two component, unfilled, thixotropic epoxy resin system for use with GELCOAT EP 4060 and ALCHEMIX EP 4350 laminating paste.  ALCHEMIX EP 4060C is specifically formulated for high temperature applications.

ALCHEMIX GELCOAT EP 407 is a two component, dolomite filled, brushable, room temperature curing surface coat. The gelcoat EP407 has high heat resistance, good edge stability, it can be repaired and polished to a smooth finish.

ALCHEMIX EP435 is enriched with long glass fibre strands, and special fillers in a low-density epoxy resin specially formulated.   After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. Used as a back filling compound to support rigid Gelcoats and flexible casting compounds.

ALCHEMIX EP 4350 is a glass fibre reinforced epoxy laminating paste for use as a back filling compound in combination with GELCOAT EP 4060 and ALCHEMIX EP 4060C coupling coat. After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. ALCHEMIX EP 4350 is formulated for use in RIM tools, moulds for pre-pregs and applications requiring high heat resistance.

• R.I.M. Tooling
• Resin Casting

• Back Filling
• R.I.M. Tooling
• Vacuumforming and Thermoforming

• Back Filling
• Foundry Patterns & Core Boxes
• R.I.M. Tooling
• Vacuumforming and Thermoforming

• Back Filling
• Composites
• Foundry Patterns & Core Boxes
• Jigs & Fixtures
• R.I.M. Tooling

• Foundry Patterns & Core Boxes
• R.I.M. Tooling
• R.T.M. Tools
• Vacuumforming and Thermoforming

• Composites
• R.I.M. Tooling
• R.T.M. Tools
• Resin Infusion
• Vacuumforming and Thermoforming

• Composites
• R.I.M. Tooling
• R.T.M. Tools
• Vacuumforming and Thermoforming

• Composites
• Hand Lay Up / Laminating
• Master Patterns
• R.I.M. Tooling
• R.T.M. Tools

• Back Filling
• Composites
• Foundry Patterns & Core Boxes
• R.I.M. Tooling
• R.T.M. Tools
• Vacuumforming and Thermoforming

• Composites
• R.I.M. Tooling
• R.T.M. Tools
• Vacuumforming and Thermoforming

Download 8014 Technical Data ( pdf )

Download A 87 Technical Data ( pdf )

Download EP 401 Technical Data ( pdf )

Download EP 4060 Technical Data ( pdf )

Download EP 4060C Technical Data ( pdf )

Download EP 407 Technical Data ( pdf )

Download EP 4350 Technical Data ( pdf )