HomeApplicationsMannequins
PU 3617

Mannequins

Category Archives: Mannequins

Code
Description
PU 3580
  ALCHEMIX PU 3580 is a two component polyurethane foam system, that when mixed gives a medium density soft, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 140 – 160 kgm-3, however the foam can be over packed in the mould to give higher densities of up to 500 kgm-3. The final hardness of the foam can be adjusted by small adjustments to the mixing ratio.
PU 3584
  ALCHEMIX PU 3584 is a two component polyurethane foam system, that when mixed gives a low density semi-rigid, elastomeric foam. The foam is self skinning, durable and has excellent physical properties. Typical free rise density is between 90 – 100 kgm-3, however the foam can be over packed in the mould to give higher densities of up to 300 kgm-3.
PU 3614
ALCHEMIX PU 3614 is a two component polyurethane foam system, that when mixed gives a low density rigid foam. ALCHEMIX PU 3614 can be used for a variety of applications such as structural infill of hollow components .The foam is durable and has excellent physical properties. Typical free rise density is between 38 – 44 kgm-3.
PU 3615
ALCHEMIX PU 3615 is a two component polyurethane foam system, that when mixed gives a medium density rigid foam. ALCHEMIX PU 3615 can be used for a variety of applications such as structural infill of hollow components .The foam is durable and has excellent physical properties. Typical free rise density is between 80 – 88 kgm-3.
PU 3616
ALCHEMIX PU 3616 is a two component polyurethane foam system, that when mixed gives a medium density rigid foam. ALCHEMIX PU 3616 can be used for a variety of applications such as structural infill of hollow components .The foam is durable and has excellent physical properties. Typical free rise density is between 150 – 160 kgm-3,
PU 3617
ALCHEMIX PU 3617 is a two component polyurethane foam system, that when mixed gives a medium density rigid foam. ALCHEMIX PU 3617 can be used for a variety of applications such as structural infill of hollow components .The foam is durable and has excellent physical properties. Typical free rise density is between 240 – 260 Kgm-3,
Product
Mix Ratio
(pbw)		 Pot Life
(200g, 25°C)
minutes		 Cure Time
(25°C)
Hours 		Viscosity
(25°C)
mPa.s		 HDT
°C		 Shore
Hardness
PU 3580
variable
data
data
data
n/a
n/a
PU 3584
100:48
data
data
data
n/a
data
PU 3614
100:80
data
data
data
data
data
PU 3615
100:95
data
data
data
data
data
PU 3616
100:90
data
data
data
data
data
PU 3617
100:85
data
data
data
data
data
Code
Application
PU 3580
  • Back Filling
  • Composites
  • Mannequins
  • Model Making
PU 3584
  • Back Filling
  • Composites
  • Mannequins
PU 3614
  • Composites
  • Mannequins
  • Model Making
PU 3615
  • Back Filling
  • Composites
  • Mannequins
  • Model Making
PU 3616
  • Back Filling
  • Composites
  • Mannequins
  • Model Making
PU 3617
  • Back Filling
  • Composites
  • Mannequins
  • Model Making