ALCHEMIX GELCOAT EP 402B is a two component, mineral filled, brushable, room temperature curing surface coat. Also available in White.

ALCHEMIX EP4351 is enriched with long glass fibre strands, and special fillers in a low-density epoxy resin specially formulated.   After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. Used as a back filling compound to support Rigid Gelcoats and flexible casting compounds.

ALCHEMIX EP 519 with HARDENER H3, H7 or H8 is a cold-curing, two part, unfilled epoxy resin system. It is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. It has excellent adhesion to metallic and insulating materials. It can also be used for applications such as coating of insulating tapes and locking of screws etc.

ALCHEMIX EP 521 is a three part epoxy laminating system consisting of Resin, Hardener and Accelerator. The product has very low initial viscosity, low shrinkage and excellent reproduction of detail. Rate of cure may be adjusted by altering the quantity of Accelerator.

ALCHEMIX PU 3501 is a flexible polyurethane moulding system with excellent tear strength and high elongation. ALCHEMIX PU 3501 is formulated for a broad field of applications where a high degree of flexibility and strength is required.

ALCHEMIX R4 is a liquid solution of polyvinyl alcohol (PVA) in ethyl alcohol. Release Agent R4 is intended for use as a mould release/parting agent for fabricating mouldings in polyester gelcoat and layup resins in GRP construction.

ALCHEMIX R5 is a wax based aerosol release agent, which is free of silicone and chlorohydrocarbons. When applied in a thin coating, the carrier easily and quickly evaporates, leaving a thin film of wax on the surface. The wax can take temperatures up to 100°C without melting and boiling.

ALCHEMIX RTV 240 is a two component addition cure silicone rubber with the facility to alter the Shore A hardness by the use of different catalysts.   Used for the moulding of complicated parts with precise dimensions. There is also a blue catalyst available for thei product.

ALCHEMIX RTV 250 is a two component addition cure silicone rubber with the facility to alter the Shore hardness by the use of different catalysts.   Used for the moulding of complicated parts with precise dimensions. There is also a blue catalyst available for this product.

ALCHEMIX RTV 272 is a two component addition cure silicone rubber with an extremely high tear strength and long mould life.   Used for the moulding of complicated parts with precise dimensions.

• Cases for Ceramics
• Composites
• Master Patterns
• Negatives and First Reproductions

• Carbon Prepreg Tooling
• Cases for Ceramics
• Composites
• Hand Lay Up / Laminating
• Master Patterns
• R.I.M. Tooling
• R.T.M. Tools
• Vacuumforming and Thermoforming

• Back Filling
• Cases for Ceramics
• Composites
• Hand Lay Up / Laminating

• Cases for Ceramics
• Composites
• Foundry Patterns & Core Boxes
• Sanitaryware Moulds

• Cases for Ceramics
• Concrete Moulding
• Face Casting - Concrete
• Fibrous Plastering
• Foundry Patterns & Core Boxes
• Model Making
• Sanitaryware Moulds

• Cases for Ceramics
• Composites

• Cases for Ceramics
• Concrete Moulding
• Foundry Patterns & Core Boxes
• Jigs & Fixtures
• Sanitaryware Moulds

• Cases for Ceramics
• Composites
• Fibrous Plastering
• Model Making
• Mould Making
• Vacuum Casting

• Cases for Ceramics
• Sanitaryware Moulds
• Vacuum Casting

• Cases for Ceramics
• Concrete Moulding
• Fibrous Plastering
• Model Making
• Mould Making
• Pad Printing
• Sanitaryware Moulds
• Vacuum Casting

Download EP 402B Technical Data ( pdf )

Download EP 519 Technical Data ( pdf )

Download EP 521 / H521 / A521 Technical Data ( pdf )

Download PU 3501 Technical Data ( pdf )

Download R4 Technical Data ( pdf )

Download R5 Technical Data ( pdf )