HomeApplicationsCarbon Prepreg Tooling
M 702

Carbon Prepreg Tooling

Category Archives: Carbon Prepreg Tooling

Code
Description
EP 4093
ALCHEMIX GELCOAT EP 4093 is a colourless, two component, brushable, room temperature curing surface coat. GELCOAT EP 4093 is designed for use in vacuum forming moulds, applications requiring high heat resistance and negatives where very fine surface finishes are required.
EP 4351
ALCHEMIX EP4351 is enriched with long glass fibre strands, and special fillers in a low-density epoxy resin specially formulated.   After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. Used as a back filling compound to support Rigid Gelcoats and flexible casting compounds.
EP 574
ALCHEMIX EP 574 / H574 is a two part, ambient temperature cure, epoxy system; exhibiting outstanding mechanical and thermal properties. This system has low mixed viscosity and when cured shows excellent high temperature and physical properties. This system has excellent wetting properties for various fibre systems including glass fibre, aramid fibre and carbon fibre etc.
EP 5751/H22
ALCHEMIX EP 5751 / H22 is a two part, ambient temperature cure, epoxy system; exhibiting outstanding mechanical and thermal properties. This system has remarkably low mixed viscosity and when cured shows good material properties. This system has excellent wetting properties for various fibre systems including glass fibre, aramid fibre and carbon fibre etc.
M 702
Model Board M702 is an epoxy board material with very high heat resistance and very low coefficient of thermal expansion making it ideal for applications where dimensional stability is essential.
Product
Mix Ratio
(pbw)		 Pot Life
(200g, 25°C)
minutes		 Cure Time
(25°C)
Hours 		Viscosity
(25°C)
mPa.s		 HDT
°C		 Shore
Hardness
EP 4093
100:20
35-40
8-14
Viscous
110-115
85-90D
EP 4351
100:8
80
12-40
Paste
110
80D
EP 574
100:35
300-360
24
450-650
170
85-88D
EP 5751/H22
100:22
50-60
24
250-500
100-110
80-85D
M 702
n/a
n/a
n/a
n/a
140
70D
Code
Application
EP 4093
  • Carbon Prepreg Tooling
  • Composites
  • Cosmetic Carbon Fibre
  • Hand Lay Up / Laminating
EP 4351
  • Carbon Prepreg Tooling
  • Cases for Ceramics
  • Composites
  • Hand Lay Up / Laminating
  • Master Patterns
  • R.I.M. Tooling
  • R.T.M. Tools
  • Vacuumforming and Thermoforming
EP 574
  • Carbon Prepreg Tooling
  • Composites
  • Hand Lay Up / Laminating
  • R.I.M. Tooling
  • R.T.M. Tools
EP 5751/H22
  • Carbon Prepreg Tooling
  • Composites
  • Hand Lay Up / Laminating
  • Mould Making
M 702
  • Carbon Prepreg Tooling
  • Composites
  • Master Patterns
  • R.I.M. Tooling
  • Vacuumforming and Thermoforming